First thing to Consider Before CCTV installation is the location and the distance your camera and monitoring equipments Should Be. It is important to place your cameras in well lit areas for good camera views, and images, Do not mount cameras in locations pointing in Exposure to direct sunlight. Do Not hide cameras in dark areas or not lit location of the room. However, for dark infrared cameras There Are rooms well-suited for this condition. Homeowners opt to purchase dog variable focus lens focal length lens to Regulate Which will permit Movement of the focal length distance Within Specified. Other components You Need Are DVR, LCD monitor, and power supply box. Often, Homeowners prefer to run cables Their CCTV systems on Their Attics s, which is adviseable for easy drilling of exterior wall purposes.
Instruction:
2-3 ft Pull out power and coax cables, use an electric tape to fasten Both cables, fasten around 5-7 inches, and mark the set of cables of Each camera to Avoid confusion in the future, when you're doing maintenance Some on your security cameras. On the location of your first CCTV installation, drill a hole.
On Each camera position, mount your exterior wall enclosures to the fittingly, pero leave enough space for left-right, upward-downward tilt. Insert the cables on apt holes in the rear of the enclosure, the Remaining Proceed Mounting enclosures. Place your DVR in ITS position, add BNC (Bayonet Neill Concelman) connectors to all coax wires. Join the power wires together and insert it to the power supply (not plugged in). Focus and connect the mounted cameras. Set up the software installation to configure the monitor to pick-up camera signal.
0 comments:
Post a Comment